black, in G-VG condition, unit consists of a rack & pinion mounted front standard that bears a large, 3-lug bayonette lens mount, with another, smaller diameter screw thread mount within. The camera comes with an adapter that accepts L39 lenses (enlarger thread). The standard is joined to the body of the camera with a set of bellows, in VG condition. The rack has a scale attached to the left hand side supporting arm, in cm, from 0 to 15. The camera shutter is housed within the front standard & is electrically controlled via an internal solenoid. Single bladed shutter. Within the camera body is a large SLR style mirror that can be lowered & raised manually via a lever to the top of the camera body. When that lever is set to 'Focus' the mirror travels downwards. The camera comes with two similar film magazines, one for 70mm roll film, & the other for 35mm roll film. There is an internal spool, with teeth that correspond to film perforations, the gears can be moved to be spaced for either format film magazine. There is a large lever with a retained pull-out type locking pin, with engraved graduations marked 4, 8, 9, 10, 13, 16, & 18. Within the camera, there are two metal baffels that move inwards as the lever's corresponding value is increased. I.e. at '4' the baffels leave their widest gap, at '18' the baffels leave a small gap. This mechanism changes the aspect ratio of the image that will be captured on the film. Bottom of camera with two connections for external devices, likely power & capture input devices, internals appear to be in VG condition,